How to Install a Honda Control Arm in 6 Steps
Your vehicle's control arm is an essential part of your vehicle's front suspension. The control arm connects the steering knuckle assembly and the wheel hub to the vehicle's frame. Although this part is not a common repair, there will still be some circumstances that will require you to replace your control arm. One of the few reasons why you need to replace your Honda's control arm is when the ball joint gets worn-out and causes sloppy steering. It is impossible to replace the ball joint without replacing the control arm. Another reason is a vehicle accident causing the front wheel to become damaged. This will result in a bent control arm and will definitely need a replacement. A worn-out bushing is another reason why you need to change the control arm. You will experience extreme noise if the bushing is totally damaged. The entire installation process may only take you about an hour to finish.
Required skill level: Intermediate
Needed tools and materials
- Safety glasses
- Latex gloves
- Breaker bar or Tire iron
- Ball joint separator
- Torque wrench
Preparing for the installation
Make sure to park your vehicle in a shaded area with a level surface, and then don't forget to set the parking brake. Use your breaker bar or tire iron to loosen your front wheel lug nuts without removing them. Jack up the front of your vehicle using a heavy-duty jack and jack stands.
Removing the front wheels
Now that your vehicle is lifted already, you may now safely remove the lug nuts. Remove the front wheels carefully and place them in a safe area.
Supporting the lower control arm
You need to support the lower control arm of your vehicle with a floor jack if your vehicle has a spring coil with short or long arm suspension. Before removing the lower control arm, you must check and contain the coil spring first. You also need to remove the tension on the bar if your vehicle has a torsion bar suspension.
Getting into the control arm assembly
Take away the cotter pin from the ball joint nut (if equipped). You need to gently loosen the nut, but you don't need to remove it. Remember to remove the bolt if the ball joint has a pinch bolt. Use your ball joint separator to detach the ball joint from the knuckle. Take away the nut and safeguard the knuckle.
Removing the control arm assembly
All components that are still attached to lower control arm must be unfastened. Take away the control arm mounting bolts and remove the control arm assembly.
Installing the new control arm
You can now install the new control arm, and secure the mounting bolts. Remember not to torque the bolts until your vehicle is at its normal riding height. After that, you need to install the steering knuckle back into the control arm or ball joint assembly. Use your torque wrench and carefully torque the castle nut. Install the new cotter pin, and put back all the components to the control arm of your vehicle. You can now reinstall the front wheels and tighten the lug nuts. Carefully lower your vehicle, and torque the lug nuts and control arm mounting bolts, following your manufacturer's specifications.
Dorman Control Arm
For consumers looking for a control arm for their vehicles, a Dorman control arm is often included among the best options. This product is one of the most reliable ones in the market because of its top-rate quality. It works very efficiently by making car steering so much simpler, which allows drivers to maneuver the vehicle suspension without exerting so much effort. The Dorman control arm is also sold with bushings that tighten the steering linkage on the assembly. So with just a single purchase, people would already have all the things that they need to improve their vehicles' performance. Installing a high-quality control arm can surely guarantee drivers an easier time in making corner turns and prevent passengers from feeling car sick while driving on bumpy roads. What's even better is that Dorman offers a superb warranty on its products.
OES Genuine Control Arm
The OES Genuine control arm is specifically designed to help drivers gain full and easier control of a car's steering in order to give passengers a comfortable ride. But what makes the OES Genuine so much better than the other brands in the market is the fact that it offers top quality parts at very affordable rates. Control arm packages from this brand also come with bushings made from standard polyurethane materials that give the products better capacity to have a strong hold on the wishbone and the rest of the suspension system. Having efficient control arms on all sides of the vehicle makes for a better control of the car characterized by a relative ease when making turns on the roads. OES control arms are manufactured with utmost attention to details so consumers can be sure that each of the products has the exact specifications and dimensions needed by the car.
Karlyn Control Arm
Karlyn is known as the most reliable brand of control arms in the market. It offers OE replacement parts to consumers who are looking for quality components for their vehicles. The Karlyn control arm is manufactured following the exact specifications of OEM auto parts. This means that people will not have a hard time installing a replacement model on the vehicle because Karlyn control arms are carefully designed to fit various car models. A complete control arm package includes a brand new control arm, bushings made from high-quality materials, and a limited 1 year or 12,000 mile warranty for items with physical defects. The Karlyn control arm is considered as one of the better options because it is durable and shows a significant improvement on the performance of the vehicle. Also, it is much less costly than other OEM replacements sold in the market today. Now, consumers can surely maximize the function of the suspension of their cars without the need to worry about the compatibility of the parts.